Tether

by slashneck · Video

One camera for every app: use your webcam or any phone (iPhone too) in Discord, OBS and Zoom, with a cover hotkey, zoom and filters.

✓ VerifiedOpen source · GPL-3.0Unsigned↓ 576 downloads★ 0 on GitHubNo ratings yetAndroidWindowsWeb app

About

Tether

Latest release Downloads Windows 11 Android 8 and newer GPL 3.0

Download for Windows   |   Getting started   |   Features   |   Build it yourself


Tether is a webcam tool for Windows. It adds one camera, Tether Camera, that Discord, OBS, Zoom, Teams and your browser see like any other, and puts everything you wish your webcam could do in front of it: a hotkey that covers you instantly, zoom and framing, filters, rotate and mirror. Feed it your normal webcam, or your Android phone over a USB cable with the free Tether phone app. Pick Tether Camera once in each app; switching sources, covering yourself or changing the look happens in Tether, and your apps never notice.

Getting started

  1. Install Tether. Download TetherSetup-x.y.z.exe from the latest release and run it. Windows asks for admin rights once, because Tether Camera is added for the whole PC.
  2. Pick a source in Tether: any webcam on your PC, or your phone.
  3. Pick "Tether Camera" in your app. Done.

Any phone over Wi‑Fi, iPhone included. Pick Phone over Wi‑Fi as the source, scan the QR code Tether shows, and tap Start camera on the page that opens. Nothing to install on the phone: it runs in the browser. Phone and PC need to be on the same network.

Android phone over USB? Turn on USB debugging (Settings → About phone → tap Build number seven times, then Developer options → USB debugging), plug it in and tap Allow. Then Setup → Install on phone in Tether puts the app on it, and keeps it updated. Prefer doing it yourself? Download Tether-x.y.z.apk from the release page on your phone.

Features

One camera, any source. Your webcam or your phone, switched in Tether while your apps keep seeing the same Tether Camera. No re-picking cameras in Discord mid-call.

Cover hotkey. One global shortcut (Ctrl+Shift+H by default) swaps your camera for a picture or GIF of your choice, instantly, in every app at once. The same cover shows if the source drops, instead of a frozen face.

Zoom, framing and filters. Zoom in and pan, fill/fit/stretch the frame, rotate and mirror, plus B&W, Noir, Warm, Cool, Vivid and Fade filters and brightness, contrast and saturation sliders. The preview shows exactly what your apps get.

No driver. Tether Camera uses Windows 11's built-in virtual camera support. Nothing runs in the kernel, there's no driver to sign, and uninstalling leaves nothing behind.

Your phone as a webcam, done right. Over USB: fast, private (nothing on your Wi‑Fi can connect) and immune to Wi‑Fi drops. The phone encodes on its own hardware, the PC decodes with Windows' built-in decoder, and a heartbeat reconnects by itself within seconds, so a wiggled cable is a short freeze, not a restart.

Any phone over Wi‑Fi. No cable, no app: the Tether page in the phone's browser sends the camera straight to your PC over your own network (WebRTC, the same technology video calls use). It works on iPhone too. To connect, the two only swap a short "how to reach me" note through Patchbay, which forgets it right away; the video never leaves your network.

The phone stays out of the way. Back or front camera, resolution, frame rate, quality and the flashlight are set from the PC. On the phone: a live preview you can switch off to save battery, and a screen that dims to minimum while streaming. Quitting Tether on the PC closes the app on the phone too.

Updates itself. Tether checks GitHub for a new version (you can switch that off) and installs it after checking its SHA-256. The phone app comes with the PC app, and Tether offers to update the phone when it's behind.

Requirements

  • Windows 11 (virtual cameras arrived with Windows 11)
  • A webcam, any phone with a modern browser on the same network, or an Android phone (8 or newer) with a USB cable that carries data

Privacy

Tether sends no video or pictures anywhere: they stay on your PC, the cable, or your own network. For a Wi‑Fi phone, the PC and the phone swap their local network addresses through Patchbay once (deleted as soon as it's read, at most after 10 minutes), and only while Phone over Wi‑Fi is the source. Apart from that, the only network request Tether makes on its own is asking GitHub for the newest release, which you can switch off under Setup → About.

Building

You need Rust (MSVC toolchain), the Android SDK with a JDK 17 or newer, and the .NET 8 SDK.

pc\        Windows app (tether.exe) and Tether Camera (tether_vcam.dll), Rust
android\   phone app, Kotlin, no third-party libraries
setup\     the installer, C# / .NET Framework 4.8
docs\      wire protocol and plan
  • cd pc && cargo build --release builds the Windows app and the camera DLL.
  • scripts\dev-install-vcam.ps1 registers the freshly built camera DLL for testing (asks for admin).
  • cd android && .\gradlew.bat assembleDebug builds the phone app.
  • build-release.ps1 builds everything into release\: the setup, the APK, their checksums and a source zip. Release APKs are signed with a key kept outside the repo; without it, the APK is signed with the debug key.

The phone and the PC talk over a small protocol documented in docs/PROTOCOL.md.

License

Tether is free software under the GNU General Public License v3.0. It includes adb from the Android Open Source Project; see THIRD-PARTY-NOTICES.md.

Patch notes

Tether 1.1.1

18 Nov 2026

Patchbay has a new home: patchbayapps.com.

Changed

  • Phone over Wi‑Fi now connects through Patchbay's new address. The old address keeps working, so older versions aren't broken; this just moves Tether over for good.

Download TetherSetup-1.1.1.exe, or let Tether update itself (Setup → About → Check for updates). The USB phone app is optional and comes with Tether.

SHA-256

c6a26d32f160fbf5506bc50c31c1693ae39d10768ff33e9fa008f3dc7e39896a  TetherSetup-1.1.1.exe
af6386b662f8aead093c5051554841b718ceb3219728ee65e8e89712240f8f2d  Tether-1.1.1.apk
All releases on GitHub ↗

Ratings & comments

No ratings yet. Be the first to rate it.

Sign in to rate:

No comments yet. Be the first to say how it ran.